Tactical Charging Handle for Benelli M4 Tactical Shotgun
Replacing the factory bolt handle on the Benelli M4 is a must for any serious M4 enthusiast. FFT has tested many tactical charging handles offered in the marketplace, and in the end we decided to manufacture our own tactical charging handle, and we are proud to offer it in both Titanium and steel. Our handle utilizes certain design features that already exist in the marketplace, combined with some design enhancements and improvements that we believe the M4 enthusiast will find to be a great improvement to the functionality of their M4 tactical shotgun.
FFT's charging handles are considerably larger than the factory Benelly M4 bolt handle, and has a beautiful and rugged knurling around the outside of the knob, with three smooth rings that allow for a better grip of the unit. For good measure, every charging handle is stamped with the text "Made in USA." Also, FFT's charging handles are not the same as the "spinner" models that are made for older model's of Benelli shotguns. FFT's charging handles properly lock into place just as the original factory Benelli M4 bolt handle.
FFT's Titanium tactical charging handle is manufactured wtih the finest Titanium with a tensile strength of 130,000 P.S.I. with a hardness of C36 on the Rockwell scale, and an amazingly low weight of 15.99 grams. The Titanium charging handle is offered in both the finished version that beautifully matches the firearm, or a more radical brilliant Titanium version for those wishing to be a little different.
FFT's steel tactical charging handle is manufactured with pre-heated high grade steel, and heat treated again to a Rockwell 32 to 36. It is finished off with a zinc phosphate finish that beautifully matches the finish on the Benelli M4.
- Brilliant Titanium Replacement Charging Handle for Benelli M4
(including 11707, 11717, and 1014): $52.99 - Finished Titanium Replacement Charging Handle for Benelli M4
(including 11707, 11717, and 1014): $52.99 - Steel Replacement Charging Handle for Benelli M4
(including 11707, 11717, and 1014): $39.99
Magazine Extension Tube for Benelli M4 Tactical Shotgun
Here we have an extension magazine tube for the Benelli M4 tactical shotgun, offered in both Titanium and steel. Both beautifully crafted in a precision machine shop, these parts are designed to replace the "spacer" or "fake magazine extension" that Benelli installs on every civilian M4 shotgun. Simply remove the spacer, free up and remove the spring, install our replacement spring (we provide at no extra charge with every tube sold a brand new spring specifically manufactured by Wolff Gunsprings), and screw this on the end of the standard magazine tube. All full length magazine tubes are stamped with the text "Made in USA," with the Titanium magazine tubes also being stamped "Titanium."
The extension tube, in either Titanium or steel, is an excellent alternative to the Benelli M4 enthusiast who does not always require a magazine capacity of 7+1 and prefers to have the option of 5+1 or 7+1, and also enjoys the ease of use of swapping out parts to change the capacity for his or her needs.
The Titanium extension magazine tube is offered in both brilliant Titanium or finished to match the firearm, and is made with the finest Titanium with a tensile strength of 130,000 P.S.I. and a hardness of C36 on the Rockwell scale. Furthermore, the Titanium extension magazine tube weighs in at 57.47 grams, which is considerably less than all other aftermarket extensions in the marketplace today.
The steel extension magazine tube is made with quality steel, heat treated to a Rockwell B 84-87. It has a zinc phosphate finish that beautifully matches the finish on the Benelli M4. The steel extension magazine tube it is a pleasing and affordable alternative to the spacer and offers the strength and durability desired in such replacement parts.
- Brilliant Titanium Extension Magazine Tube for Benelli M4
(including 11707, 11717, and 1014): $159.99 - Finished Titanium Extension Magazine Tube for Benelli M4
(including 11707, 11717, and 1014): $159.99 - Steel Extension Magazine Tube for Benelli M4
(including 11707, 11717, and 1014): $109.99
Full Length Magazine Tube for Benelli M4 Tactical Shotgun
For the serious Benelli M4 enthusiast, we have replacement full length magazine tubes in both Titanium and steel. Like the parts above, every full length magazine tube is made with one-piece construction and is beautifully crafted in a precision machine shop. The full magazine tube is designed to replace the original magazine tube and "spacer" or "fake magazine tube" that Benelli installs on every civilian M4 tactical shotgun, giving you a 7+1 capacity rather than a 5+1 capacity. Simply remove the spacer, free up and remove the spring, install our replacement spring (we provide at no extra charge with every tube sold a brand new spring specifically manufactured by Wolff Gunsprings), and screw this on the end of the standard magazine tube. All full length magazine tubes are stamped with the text "Made in USA," with the Titanium magazine tubes also being stamped "Titanium."
The full length Titanium magazine tube is offered in both brilliant Titanium or finished to match the firearm, and is made with the finest Titanium with a tensile strength of 130,000 P.S.I. and a hardness of C36 on the Rockwell scale. Furthermore, the Titanium magazine tube weighs in at 152.68 grams, which is considerably less than most all other aftermarket extensions in the marketplace today. To compare, the factory magazine tube and spacer provided on a stock Benelli M4 weighs in at 297.97 grams. Our Titanium is just barely more than half the weight of the original parts!
The full length steel magazine tube is made with steel and heat treated to a Rockwell B 84-87. It has a zinc phosphate finish that beautifully matches the finish on the Benelli M4. The steel magazine tube it is a pleasing and affordable alternative to the spacer and offers the strength and durability desired in such replacement parts. Weighing in at 292.08 grams, it still weighs less than the factory magazine tube and spacer as provided by Benelli out of the box!
- Brilliant Titanium Full Length Magazine Tube for Benelli M4 (including 11707, 11717, and 1014): $239.99
- Finished Titanium Full Length Magazine Tube for Benelli M4 (including 11707, 11717, and 1014): $239.99
- Steel Full Length Magazine Tube for Benelli M4 (including 11707, 11717, and 1014): $139.99
